300mm laser reflector mirror

wholesale Factory Coating Dichroic Optical Filter Sapphire Optical Glass Design Silicon Window For Lighting Specification Materials BK7 or other optical glass,quartz,sapphire,Ge,Si,ZnSe,CaF2 etc Length 5~200mm Width 5~200mm Diameter 1.5~300mm Center thickness tolerance +/-0.01mm Length tolerance +/-0.01mm Width tolerance +/-0.01mm Diameter tolerance +/-0.0005mm Surface accuracy N=1~3 Irregularity ΔN=0.1~0.5 Surface quality 10/5~60/40 Coating Upon request Application area

High quality glass uv ir cut tester aperture optical narrow bandpass plastic optical filter Surface quality: 0/0,40/20 80/50 Surface accuracy: 1/10 into,1/4 into2 into Thickness business trip: ±0.02mm Center deviation: 5Arc second1Arc Minute Process the scope: The thickness is the most thin to attain 0.5 mm Coated: Tempered Specification Materials BK7 or other optical glass,quartz,sapphire,Ge,Si,ZnSe,CaF2 etc Length 5~200mm Width 5~200mm Diameter 1.5~300mm Center thickness

Manufacture customize Advance uv optical ir infrared pmma camera optical filter These longpass colored glass filters are manufactured from different colors of glass and are intended for use in a wide variety of applications. In addition to the longpass filters offered here, we also offers a series of bandpass colored glass filters. In either case, the filters are available in both round and square varieties. The 25 mm round filters will fit into our manual or motorized filter

BK7 Resin 1.5mm To 300mm Double Concave Lens Sapphire Product Overview Wholesale manufacturers BK7 resin and other optical glass sapphire dome double concave cemented sapphire optical lens Shanghai Advance Optical-Electronics Technology Co., Ltd. is a technology-based production enterprise, officially established in September 2009. The plant is located in Qingpu Industrial Park, Shanghai, only half an hour's drive from Shanghai Hongqiao International Airport. The company

Doublet 1.5mm To 300mm K9 Aspherical Optical Lens Wholesale K9 optical glass lens achromatic lens doublet cemented lens Material Optical glass, Fused silica, Silicon, Germanium, CaF2, MgF2, Sapphire, Znse, Zns Diameter 1.5 to 350mm Diameter Tolerance ±0.05 mm (Standard), up to +0.000/-0.002 mm Thickness tolerance ±0.01 mm (Standard), up to +/-0.0.1mm Surface Quality 60-40 S/D (Standard), up to 10-5S/D Surface Figure λ/4 or λ/10 Centration 1 Minute or 30 Second Coating

43mm Optical lenses protective dome ball and half ball lenses glass cover used for underwater photography Concave lenses, are a simple lens with one spherical face and one flat plano face. Because the spherical face is concave the lens has a negative focal length, allowing the part to increase the divergence of convergent light. Concave lenses can be used to balance out the spherical aberrations caused by other lenses. This makes concave lenses very useful for controlling

Focal Length Concave Glass Nova Display Fiber Uncoated Plano-concave Lenses Double concave Lens Most of the single lens forms, planoconvex, planoconcave, meniscus and aspheric, are available in plastic. Plastic lenses are generally cheaper and lighter than glass equivalents but of lower quality. Plastic lenses are not as robust as glass as they can scratch more easily and some will deteriorate when exposed to UV light. If they are to be used outside the visible, in the UV or

Custom optical half ball spherical Ge germanium Infrared IR half ball silica spherical optical lens Aspheric lens surfaces are used to correct spherical aberration (where the converging light from a lens does not have a common focal point, resulting in a distorted image) in lasers and imaging. Traditional spherical lenses cannot collimate light effectively because even small angles of incidence can produce spherical aberrations. This can mean that several components may be

customized trial set clear optical lens instrument plano-concave lens transparent optical lens Rod Lenses are a special variant of cylindrical lenses. They are complete rods where the light passes through the sides of the rod and focuses a line. Rod lenses have an outside face that is polished and the ends ground. The table below gives angular lengths of the line for a 1mm diameter laser beam. Typical uses for rod lenses would be to generate a line image from a circular laser

Focal Length Concave Glass Nova Display Fiber Uncoated Plano-concave Lenses Double concave Lens Advance Optical-Electronics manufactures various shape and materials optical lens. Wide selection of optical lens includes spherical lens, aspherical lens, cylindrical lens, magnifying lens, Plano-convex lens, Plano-concave lens, Biconvex lens, Biconcave lens, Meniscus lens, CaF2 Lens, Achromatic lens, Ball lens, Other Optical Lenses. Coatings for lens include normal BBAR coating,

Surface quality 10/5~60/40 Plano Convex Lenses Infrared Collimator Spherical Silica Lenses Optical Design Optical glass, also called optical lens, glass lens and optical glass lenses, is always divided into plano-convex (PCX), double-convex (DCX), plano-concave (PCV) and double-concave (DCV) lens. The materials are always soda-lime, borosilicate and quartz. The diameters range from 1 mm to 300 mm and tolerance is controlled below ±0.1 mm. Our glass lens can resist scratching,

Focal Length Concave Glass Nova Display Fiber Uncoated Plano-concave (pcv) Lenses Biconcave Lens Optical glass, also called optical lens, glass lens and optical glass lenses, is always divided into plano-convex (PCX), double-convex (DCX), plano-concave (PCV) and double-concave (DCV) lens. The materials are always soda-lime, borosilicate and quartz. The diameters range from 1 mm to 300 mm and tolerance is controlled below ±0.1 mm. Our glass lens can resist scratching, which